No need for a subwoofer box in this ride-there are 5.3 liters of booming bass going on here. Once that MSD billet distributor and 6AL box has lit the fuse on this explosive combination, a set of BBK long-tubes are called upon to funnel the fumes into a pair of DynoMax Race Bullet mufflers with turndowns. that pedestals a 750-cfm Pro Systems carb that receives a healthy head of go juice from an Aeromotive A1000 pump and regulator. Taking full advantage of this 327's high-winding cam is an Edelbrock Victor Jr. Camshaft Innovations was given the call to come up with a stout hydraulic roller with 226/238 duration at 0.050 and 0.602/0.620-inch lift on a 111 LSA. With compression checking in at 10.7:1, the 4.00-inch bores were capped off with a set of Canfields that were gone over by the gurus at Flow Technologies in Plymouth, Michigan. With the freshly prepped block back in his Canton, Michigan, garage, Ron stuffed it with a Probe 327-inch stroker kit complete with its 3.25-inch arm and forged Probe pistons. Starting with a fresh Ford Racing Performance Parts cylinder block, he had it sent out for a quick hone and a deck job to make sure he'd have a solid and true foundation. Ron chose to build the powerplant himself because he was already familiar with the Ford 302.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |